Coaxpress frame grabber drivers#
Coaxpress frame grabber software#
Coaxpress frame grabber Pc#
Coaxpress frame grabber free#

Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.A 32-bit up/down counter for delivering a position value.An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.Quadrature Decoder tool (QDC): A composite tool including:.Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.The composition of the toolset is product- and firmware-dependent. The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. Non-isolated, +12V, 1A, with electronic fuse protection for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs.Glitch removal filter available on all System I/O input lines.It does not provide an isolation that can protect a human being from electrical shock! NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. IOUT: Isolated contact outputs compatible with 30V / 100mA loads.

Coaxpress frame grabber free#

IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers.

Coaxpress frame grabber drivers#

TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers.DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers.Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder.Any I/O input lines can be used by any LIN tool of the I/O Toolbox.4 singled-ended TTL inputs/outputs (TTLIO).State of all System I/O lines sampled at the event occurrence time.The last three 32-bit context data words of the event context data can be configured with event-specific context data:.Each custom event is associated with a 32-bit counter that counts the number of occurrences.Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers.

Coaxpress frame grabber software#

The application software can be notified of the occurrence of various events:.

Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb.

Support of early and late strobe pulses.

Accurate control of the strobe position for strobed light sources.

Support of external hardware trigger, with optional delay and trigger decimation.

Support of camera exposure/readout overlap.

Precise control of asynchronous reset cameras, with exposure control.

BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG.

A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable.

PoCXP Device detection and automatic power-on.

17 W of 24V DC regulated power per CoaXPress connector.

Maximum aggregated camera data transfer rateġ.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3) One CoaXPress Host connection status LED per connection 12.1W ( 2.5 W +3.3V, 9.6 W +12V), excluding camera and I/O power output

Coaxpress frame grabber Pc#

2.5 GT/s (PCIe 1.0) with reduced performanceġ,700 MB/s (Host PC motherboard dependent).1 lane or 2 lanes with reduced performance.3-pin 1-row 0.1' header or 2-way DIP switch.12 VDC power input for PoCXP camera(s) and I/O power.2x 26-pin 2-row 0.1' pitch pin header with shrouding.'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:.26-pin 3-row high-density female sub-D connector.Standard profile, half length, 4-lane PCI Express cardįor insertion in a standard height, 4-lane or higher, PCI Express card slot